مرحباً بكم في مؤسسة الخبرات الحديثة

Products » ADESILEX PG1


الاستخدام	Two-component, rapid-setting thixotropic adhesive for structural bonds.
الوزن	6 kg
اللون	Grey
اضافة طلبية

المميزات

التحميل

Adesilex PG1 and Adesilex PG2 are two-component products based on epoxy resins, selected fine-grain aggregates and special additives according to a formula developed in the MAPEI research laboratories.

After mixing Adesilex PG1 or Adesilex PG2 (Part A)with their hardeners (Part B), a thixotropic mix, easy to apply even on vertical structures in thicknesses up to 1 cm in a single layer, is obtained. Once prepared, Adesilex PG1 hardens by chemical reticulation alone in approx. 3 hours, while Adesilex PG2 hardens in 5 hours without shrinkage, they become compounds with exceptional bonding and mechanical strength. The products differ from each other in their working time. Adesilex PG1 is especially suitable for applications in temperatures between +5°C and +23°C, while Adesilex PG2 is recommended at higher temperatures.

Adesilex PG1 and Adesilex PG2 meet the requirements defined by EN 1504-9 (“Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity – General principles for the use of products”) and the minimum requirements claimed by EN 1504-4 (“Structural bonding”).

ADESILEX PG1.pdf

2014-01-09

Concrete Repair

MAPELASTIC

Idrosilex Pronto

LAMPOSILEX

ADESILEX PG1