مرحباً بكم في مؤسسة الخبرات الحديثة

Products » MAPEFLEX PU30


الاستخدام	High-strength, thixotropic epoxy-polyurethane sealant with high chemical resistance for movements.
الوزن	5 and 10 kg drums (A+B).
اللون	113 grey.
اضافة طلبية

المميزات

التحميل

Mapeflex PU30 is a two component thixotropic sealant consisting of devoid isocyanate free polyurethane polymer (component A) and a special hardener (component B). Mixing the two components produces a uniformly coloured thixotropic paste, easily workable with a flat trowel.

Mapeflex PU30 can be used on both vertical and horizontal surfaces. After hardening by chemical reaction alone, which takes place in approximately 24 hours without shrinkage, Mapeflex PU30 becomeselastic, resistant to water and heat, with high mechanical strength and abrasion-resistant properties, and a good adhesion to almost all materials that are commonly used in building.

Mapeflex PU30 cannot undergo work elongation above 10%. It is therefore necessary that the concrete has completed the shrinkage phase before sealing the joints (whether the joints are expansion or distribution joints). The resistance of Mapeflex PU30 to chemicals is good; however, due to the variety of products and working conditions under which it can be used, it is advisable to

carry out preliminary tests in cases of doubt. The temperature resistance of Mapeflex PU30 is

between –30°C and +80°C.

MAPEFLEX PU30.pdf

2014-01-09

Concrete Repair

MAPELASTIC

Idrosilex Pronto

LAMPOSILEX

MAPEFLEX PU30